Jaypro Volleyball Net System for 3" Floor Sleeves, PVB-4500

The Jaypro PVB-4500 net system is a high performance all aluminum net system that is affordable to virtually every volleyball program. The pin-stop height adjustment allows for sixteen different net heights ranging from 6'-6" to 8'-2". These 3-1/2"O.D. uprights have a factory installed adapter at the bottom that allows them to fit into 3" diameter floor sleeves. This system includes the patented Flex Net which eliminates all cumbersome cables and cords and replaces them with heavy-duty, woven nylon top and bottom bands. The headband attaches directly to the winch leader strap to provide superb net tension. Post pads and antennae are also included. Designed for systems set at a maximum of 36' 8" on center and a minimum of 35' on center (normal spacing is 35' 10").

Jaypro Volleyball Net System for 3" Floor Sleeves, PVB-4500 Video Transcript: This is the PVB-4500 upright from Jaypro Sports. It's almost identical to the PVB-5000 upright except it has a reducer at the bottom that will take this three and a half-inch diameter upright and allow this system to fit into a three inch diameter floor sleeve. A lot of people have existing floor sleeves that are three-inch diameter from the old steel systems but they want the lightweight benefit of an aluminum system. The problem is, when you have a three inch aluminum system you get a lot of flex under full net tension, which is undesirable. So you get the benefit of the rigidity of a three and a half-inch upright but it will still fit the 3” floor sleeve. That makes the PVB-4500 by far one of the most popular net systems from Jaypro Sports. It is very easy to setup, very easy to get good net tension, and will fit into your existing three inch diameter floor sleeves.